Orbital tube cutting machine TR25 main features:
- Bundle loader.
- Roller feeder for forward movement of tube.
- Pipe clamping tong, supplied with easily interchangeable wraparound pipe clamping inserts.
- Fully mechanical tool control (patented) driven by a brushless motor.
- External vice unit fitted with easily interchangeable wraparound clamping inserts.
| Usable Tube Diameters | 4-25 mm |
| Wheel Cutting Thickness | up to 1,5 mm (fe37) |
| Tools Cutting Thickness | up to 5 mm |
| Cutting Length | min 5 mm – max 500 mm |
| Spindle Rotation Speed | 0-1100 rpm |
| Automatic Bundle Loader Capacity | 2000 Kg |
Tecno Panamac cutting machines can be optionally fitted with some special additional devices:
– INTERNAL PIPE BLOWER used to remove all residues thoroughly
– PNEUMATIC LIMIT SWITCH unit with manual setting or optionally with an electronic axis used to set various lengths on the same bar, so as to optimise throughout and thereby minimise scraps (heads and tails) from bars. Two limit switch units manual setting can be fitted for the same purposes.
– UNLOADING UNIT made up 2 roller conveyor with immediate inclination adjustment, used to provide a firm pipe support and let operators upload from both sides. This means production can be set to 2 different lengths.
– MEASUREMENT CONTROL SYSTEM: after pipe control, this system manages the increase and decrease of the operating units work
– MARKING with punches or ink jet.
– VERTICAL PIERCING with operating unit 90°.
– TUBE END DEFORMATION, with hydraulic unit, for tube tapering and coning process.
D for cutting by means of continuous rim discs that allow a fast cutting sequence with no swarf.
U for cutting with the use of cutting tools that remove any swarf. The system performs high quality cuts in terms of finish, flatness and perpendicularity.
Sie for cutting and inner and outer beveling of the pipe.
This application uses two or four cutting tools for swarf removal. The system performs high quality cuts in terms of finish, flatness and perpendicularity.
This system executes the cutting sequence in a very short time with no added swarf. The cutting discs also allow a high production output before requiring a new sharpening process.
