Project Description
Orbital tube cutting machine TR300 main features:
- Bundle loader with electronic axis to measure the tube.
- Pipe lock clamp, with bracing clamping inserts to hold the pipe in place and quickly interchangeable.
- Tool drive with 2 or 4 slides, completely mechanical (patented), controlled by a brushless motor, which allows full stroke management, forward movement, increments and decrements during cutting, via electric microprocessor with controls and touch-screen display.
- Clamps for alignment tube with Brushless motorization.
| Usable Tube Diameters | 70-300 mm |
| Wheel Cutting Thickness | up to 6 mm (fe37) |
| Tools Cutting Thickness | up to 45 mm |
| Cutting length | min 10 mm – max 3000 mm |
| Automatic bundle loader Capacity | 3000 Kg |
Tecno Panamac cutting machines can be optionally fitted with some special additional devices:
– INTERNAL PIPE BLOWER used to remove all residues thoroughly
– PNEUMATIC LIMIT SWITCH unit with manual setting or optionally with an electronic axis used to set various lengths on the same bar, so as to optimise throughout and thereby minimise scraps (heads and tails) from bars. Two limit switch units manual setting can be fitted for the same purposes.
– UNLOADING UNIT made up 2 roller conveyor with immediate inclination adjustment, used to provide a firm pipe support and let operators upload from both sides. This means production can be set to 2 different lengths.
– MEASUREMENT CONTROL SYSTEM: after pipe control, this system manages the increase and decrease of the operating units work
– MARKING with punches or ink jet.
– VERTICAL PIERCING with operating unit 90°.
D for cutting by means of continuous rim discs that allow a fast cutting sequence with no swarf.
U or cutting with the use of cutting tools that remove any swarf. The system performs high quality cuts in terms of finish, flatness and perpendicularity.
Sie for cutting and inner and outer beveling of the pipe.
This application uses two or four cutting tools for swarf removal. The system performs high quality cuts in terms of finish, flatness and perpendicularity.
This system executes the cutting sequence in a very short time with no added swarf. The cutting discs also allow a high production output before requiring a new sharpening process.
